1

Your cart is empty.

FREE UK Delivery on everything! We ship WORLDWIDE!

Product Image Geckotek EZ-Stick Hot surface 220mm x 220mm (large)

Geckotek EZ-Stick Hot surface 220mm x 220mm (large)

£15.99

SIZE 200mm x 210mm - Duplicator i3 size, leaves small gap to the edges of the bed (can be cut and stuck to fit any shape or size if multiple items bought though)

 

Take your 3D Printing to the next level with the Geckotek EZ-Stick sheet. The Advanced Coating Technology in EZ-Stik Hot provides maximum adhesion when heated to prevent warping and easy part removal when cooled. Simply cut your EZ-Stik surface to size with standard scissors then use the peel and stick adhesive backing to attach to your build platform. Works with ABS, PLA, PETG, Nylon, Composites and more!

 

 

Eliminate Warping

We know how frustrating it is when the corners lift, or when parts come off. EZ-Stik’s Advanced Coating Technology is designed to reliably prevent peeling. No need for a raft or to ‘squish’ the first layer. Print even the most difficult parts up to 8 inches long with no peeling.

Easy Part Removal

We designed the EZ-Stik Build Surface so that even the most delicate parts release easily. No need to worry about breaking parts during removal. We recommend using our non-scratching removal tool for the most difficult parts.

Lasts Over 100 Prints

Even under the toughest conditions, EZ-Stik Build Surfaces last over 100 prints with losing adhesion. Exact life span varies depending on the materials, settings, and 3D printer. Many customers get over 300 prints on a single sheet.

Improved Durability

Even though EZ-Stik uses a polymer sheet, it is still very durable. It easily resists light scratches by the nozzle.

Maintenance and Cleaning

There is almost no maintenance needed for GeckoTek Build Surfaces. We recommend that you wipe the surface with isopropyl alcohol wipes every 5-10 prints.

Please note: If using Ninjaflex, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate.